Laser Transceiver Integrated Module

Laser Transceiver Integrated Module

This product specification sheet describes the performance indicators of the laser transceiver integrated module. Laser transceiver integrated module, mainly used in laser communication systems. There are only two types of modules for users, distinguished by laser working wavelength. Among them, the center wavelength of optical transceiver module A is ITU-C46 channel, and the center wavelength of module B is ITU-C18 channel. Other parameters have the same performance requirements.

Application Scenarios:

Drone laser communication, satellite laser communication

Performance Indicators:

Table 1: Performance indicators of optical transceiver modules

Serial Number	Project		Symbol	Minimum Value	Maximum Value	Company	Remarks
1	Light emission characteristics	Center wavelength	λ	1530	1565	nm
2		Side-Mode suppression ratio	SMSR	30		dB
3		Average output optical power	Po	0	+4.0	dBm
4		Extinction ratio	Er	8.2	-	dB
		Insert back damage	Optical Return Loss Tolerance	21		dB
5		Output eye diagram	Compliant with IEEE802.3-2008
6	Light receiving characteristics	Receiving wavelength	-	1260	1600	nm
7		Sensitivity @ 5GHz/1E-7 (BER)			-28	dBm
8		Saturation	Psat	-7.0		dBm
9		Maximum allowable input power	Mip		3	dBm
10		Receive reflection	RRx		-27	dB
11		Low power setting	T_loss_on	-37		dBm
12		Low power reverse position	T_loss_off		-24	dBm
13	Module properties	Supply voltage	Vcc		4	V
14		Supply current	Icc		600	mA
15		Shell temperature (operating temperature)	Tc	0	70	℃
16		Communication speed	-		11.3	Gb/s
17		Weight	-		200	g
18		Total radiation dose	-	50		krad(Si)

Appearance & Dimensions:

Interface Definition:

Table 2: Definition of pins for optical transceiver module

Pin#	Logic	Name	Function	Notes
1	LVTTL-I/O	SCL	2 Wire Serial Interface Data Line (Same as MOD-DEF1 as defined in the INF-8074i)
2	LVTTL-I/O	SDA	2-wire Serial Interface Data Line (Sameas MOD-DEF2 in INF-8074i)
3	LVTTL-I	TX DIS	Transmitter Disable	Note a
4	LVTTL-O	TX Fault	Transmitter Fault Indication	Note b
5		VeeT	Transmitter Ground	-
6		VeeT	Transmitter Ground	Note c
7	CML-I	TD-	Inv. Transmit Data In	Note h
8	CML-I	TD+	Transmit Data In	Note h
9		VeeT	Transmitter Ground	Note e
10		VccT	Transmitter Power	Note g
11		VccR	Receiver Power	Note g
12		VeeR	Receiver Ground	Note e
13	CML-O	RD+	Received Data Out	Note f
14	CML-O	RD-	Inv. Received Data Out	Note f
15		VeeR	Receiver Ground	Note e
16		VeeR	Receiver Ground	Note e
17	LVTTL-I	RS1	SFP+ TX Rate Select, optional	Note i
18	LVTTL-O	RX_LOS	Loss of Receiver Signal	Note d
19	LVTTL-I	RS0	SFP+ RX Rate Select, optional	Note i
20		MOD-ABS	Module Absent, Connected to VeeT or VeeR in the module.	Note c

Figure 2 Pin sequence diagram

wchen@xnchip.com

+86-17743652082